|
|
Electronic RLC meter
Dvořák, Radim ; Hanák, Pavel (referee) ; Lattenberg, Ivo (advisor)
This work deals with measurement methods of passive components R, L ,C used almost in every electrical circuit. Work describes progress of choosing the right methods for measurement and also the process of designing the autonomous RLC meter with use of ATMEL microprocessor chips. The RLC meter will be powered from rechargable battery and will be able to measure primary attributes of RLC components.
|
|
|
Design of linear structures on transistor level
Gajdoš, Adam ; Kubánek, David (referee) ; Koton, Jaroslav (advisor)
Bachelor thesis deals with the development of software for automated design frequency filters using active elements instead of inductors. The first part deals with the allocation of frequency filers by transmitted specrum and type of components used. It also deals with working mode in the circuit. Thesis also focuses on the description developmet environment in Wolfram Mathematica,and overall development and also advantages. The next chapter is devoted to the theoretical description of the program and all the necessary theoretical provisions, that are needed to manage the program, i.e. description modified nodal analysis, replacement of MOSFET transistor for Voltage Controlled Current Source and writing passive elements in programming language too. The last chapter is dedicated to the development of the program and detailed description.
|
|
|
Reactive Power Compensation of The Industrial Consumer
Hanzelka, Jiří ; Holoubek, Jiří (referee) ; Toman, Petr (advisor)
This thesis is focused on reactive power compensation and it suggests new conceptions for industrial customers. The first part describes the basics of compensation, location and ways of compensation. In conclusion of this part it is a good example of parallel reactive power compensation. The second part deals with the design of reactive power compensation specifically for raw water pumping station. Compensation was solved both on a low voltage level and on the high voltage level. For drawings were used program EPLAN Electric P8.
|
|
|
Characterisation of dielectric films on a silicon wafer
Fillner, Patrik ; Boušek, Jaroslav (referee) ; Hubálek, Jaromír (advisor)
This bachelor thesis focuses on thin oxide based dielectric layers on silicon wafer. Main effort is for characterization of properties of samples. This technology can be used for manufacturing capacitors on silicon chips. Samples are based on planar oxide layers made with thin film technology on single silicon wafers coated with electrodes deposited by evaporation or by sputtering.
|
|
|
Engine Motormanagement Software
Kopecký, Ivo ; Vítek, Ondřej (referee) ; Hájek, Vítězslav (advisor)
Fuel injection is a means of metering fuel into an internal combustion engine. In modern automotive applications, fuel metering is one of several functions performed by an "engine management system". A fuel injection system is designed and calibrated specifically for the type(s) of fuel it will handle: gasoline (petrol), Autogas LPG (also known as propane), ethanol, methanol, methane (natural gas), hydrogen or diesel. The majority of fuel injection systems are for gasoline or diesel applications. With the advent of electronic fuel injection, the diesel and gasoline hardware has become quite similar. During the last twenty years a preparation of a fuel mixture and the way of ignition in engine segment have changed the most. Instead of a carburettor it is being used the unit, which prepare fuel mixture according to a status of a car on the road e.g. change of pressure, temperature or ratio of a fuel and air.
|
|
|
Additional Drive of Road HPV
Novák, Lukáš ; Kloss, Ondřej (referee) ; Kaplan, Zdeněk (advisor)
This bachelor’s thesis is focused on the description of modern trends in additional drives of human powered vehicles study. It deals with the basic structures, the most important parts, recovery possibility and suggests future developments.
|
|
|
Low ESR meter controlled by the microcontroller
Giemza, Michal ; Adámek, Martin (referee) ; Šteffan, Pavel (advisor)
This thesis describes the design and realization of the equivalent series resistance meter of capacitors. The first part discussed the theoretical issue of the equivalent series resistance of capacitor and chooses an appropriate measuring method. The second part describes the design of functional blocks of the meter and describes the realization of the final meter by the circuit and software page. The last section describes the measurement on real capacitors and its results.
|
|
|
Domestic heat pump
Veverka, Jakub ; Joch, Lukáš (referee) ; Pospíšil, Jiří (advisor)
The aim of the Bachelor's thesis is the ,,Heat pumps and house heating " . The thesis is divided into four main parts. The first part briefly describes the principle of operation and the types of heat pumps (The variants are water to water, air to water, earth to water), including the advantages and disadvantages of their use. Heat pumps are effective solutions to home and hot water heating. The part describes the heat transfer between the condenser and the heating pipes. The second part includes a proposal for using the specific heat pump, a brief description of the selected object and calculate the heat loss. The third part pays attention to calculating the energy performance of buildings. Economic evaluation of the selected system and financial returns are contained in the fourth part of this work.
|
|
|
Study of Electric and Dielectric Properties of Ionic Liquids
Altšmíd, Jakub ; Boušek, Jaroslav (referee) ; Mikula, Milan (referee) ; Nešpůrek, Stanislav (advisor)
Dizertační práce je zaměřena na studium elektrických a dielektrických vlastností iontových kapalin. Iontové kapaliny mohou nacházet uplatnění v široké škále aplikací, především pak v elektrotechnice. Teoretická část se věnuje popisu základních vlastností iontových kapalin a možností jejich uplatnění v kondenzátorech a elektrochemických senzorech plynů. Experimentální část se věnuje použitým metodám charakterizace vlastností iontových kapalin, jsou zde popsány teoretické poznatky o dielektrické spektroskopii včetně metod stanovení fyzikálních vlastností a vyhodnocení experimentálních dat. Experimentální část je rozdělena na dvě základní části. První se věnuje studiu iontových kapalin pro použití jako elektrolytu v kondenzátorech, druhá část se věnuje studiu vlastností připravených experimentálních senzorů na NO2, zejména vlivem vlastností iontových kapalin na sledované parametry senzoru.
|
|
|
Single-Phase Induction Motor Calculation
Volf, Lukáš ; Ondrůšek, Čestmír (referee) ; Hájek, Vítězslav (advisor)
This work is in the first chapter deals with the basic properties of single phase and three-phase induction motors. The following describes the procedure for obtaining a starting torque of single-phase asynchronous motor. In the second part of the calculation is carried out single-phase induction motor with a permanently connected capacitor and its control, calculation of output values, the program proposed solution to this calculation in Microsoft Excel 2007 and calculated parameters of the development of methods of calculation were compared with measured, the values supplied by ATAS Náchod.
|
guest ::
